RFX Race Kill Button (OEM Replica) Suzuki RM125/250 06-10 RMZ250 07-14 RMZ450 07-14 RMX450 10-14

RFX Race Series Switch Gear

 

RFX Race Series kill buttons are an exact OEM replacement part. Complete with the

same couplings, fasteners, connectors and exact cable lengths as the genuine part.

Available for a wide variety of bikes.

 

• OEM replacement
• Accepts all original connectors
• OEM cable length

 

Tag Line

 

OEM Replica

 

 

Fitting Instructions

 

• Start      by removing the front number plate.
• Carefully      snip any cable ties holding the start and stop switch cables to the bars      then un-screw the clamps and let these hang down.
• Locate      the connector for the switch on the bike, these are often close by to the      headstock on the chassis but sometimes can be under the tank.
• Unclip      the connector and remove the switch taking a note of the routing for the      wiring.
• Clean      the connector using contact cleaner such as Maxima Electrical Contact      cleaner.
• Loosely      attach the new switch on to the handlebars in the desired position.
• Route      the wires as per the old switch and clip the connector together.
• Check      all free pay in the wires by turning the bars to full extension and making      sure the wires don’t pull tight, adjust if necessary.
• Re-fit      cable ties to the wires if possible positioning the cables to the back of      the bars to prevent damage from roost.
• Re-fit      your number plate.

 

Delivery

UK mainland delivery: £7.95

Order before 3pm and your order will be delivered to UK mainland within 48 hours. We can only delivery to addresses within the UK. For more details, please read our delivery information or contact us if you have any queries.

Spend over £150.00 to qualify for FREE UK delivery on your order.

Returns

Returns must be notified within 3 days of delivery date. For more details, please read our returns policy or contact us if you have any queries.