RFX Pro Throttle Tube (Black) KTM SXF/EXCF 250-525 00-15

£28.99

In stock

Description

.

Pro Series Throttle Sleeves

 

RFX Pro Series Throttle Tubes are machined from billet aluminium and feature a sealed bearing and Teflon sleeve to provide an effortless throttle action. RFX Pro Series Tubes resist damage in a crash unlike standard plastic tubes. For these reasons they are used by many of the top race teams and riders in the U.K Championships such as STR KTM.

 

  • Replacement throttle tubes for all popular off road bikes.
  • Uses the same cam profile as the OEM part for proper throttle control.
  • Hard anodised billet aluminium construction.
  • Sealed ball bearing and Teflon sleeve virtually eliminate friction.
  • Laser etched with RFX logo.
  • Knurled grip mounted area.
  • Reduced chance of damage if you crash.

 

Tag Line

 

Roller Bearing

For an effortless throttle action

 

CNC Machined Construction

For the ultimate crash resistance

 

Fitting Instructions

 

  • Slide the rubber boot down and disassemble the throttle housing, remove the old throttle tube taking care not to damage the throttle cables.
  • Carefully remove grip from the old throttle tube if required.
  • Inspect the cables and housing for excess damage or wear, clean and lube them or replace if required.
  • Clean the handlebar and inspect for damage where the old throttle tube has been spinning on the bar if a ridge is present replace the handlebars.
  • Slide the new throttle tube on the handlebar and lube using a penetrating lubricant preferably Maxima MPPL (do not use grease as this attracts dirt and makes the throttle stick after a short period of time).
  • Re-assemble the throttle cables and housing again using some penetrating lubricant.
  • Tighten the throttle housing in the correct position on the handlebars.
  • Adjust the cable to the required (free play amount) of your liking.
  • Rotate the handlebars to their maximum position to check proper operation of the throttle and correct cable routing, some re-adjustment of the cable may be required.
  • Slide the rubber boot back over the housing.
  • Cover the hole in the end of the grip with some electrical tape (To stop glue entering the throttle barrel) and apply a small amount of RFX grip glue to the outer end of the throttle tube on the outside diameter.
  • Apply a small amount of RFX grip glue to the inside of the new grip and slide onto the tube.
  • Twist the grip to the correct position and leave to dry.
  • Apply RFX safety grip wire if needed.
  • After the glue has dried again check proper operation of the throttle.   

Specification

Brand RFX
Width 10cm
Height 18cm
Weight 0.1kg
Condition New

Delivery & Returns

Delivery

UK mainland delivery: £7.95

Order before 3pm and your order will be delivered to UK mainland within 48 hours. We can only delivery to addresses within the UK. For more details, please read our delivery information or contact us if you have any queries.

Spend over £150.00 to qualify for FREE UK delivery on your order.

Returns

Returns must be notified within 3 days of delivery date. For more details, please read our returns policy or contact us if you have any queries.

Back to top

Contact

Need help? 01706 848946

Open today 8am-5pm

Top sellers

Top brands

Get in touch with SaddMX

SaddMX
Unit 1 Moss Industrial Estate
Heyside Royton
Oldham
OL2 6HR

Phone: 01706 848946

View opening hours

This website uses cookies. By continuing to browse this website, you agree to our use of cookies.

Close